Quick answer: This pre-shipment case study documents custom brushed stainless steel cabinet components during factory inspection. The photo set shows deep drawer boxes, flush folded edges, an adjustable internal divider system, removable door panels, concealed hardware preparation, and consistent directional brushing. The final steel grade, dimensions, hardware, packing method, and installation details are confirmed on the approved production drawing and quotation.
Outdoor cabinet buyer fit
This fabrication evidence is most useful to outdoor-kitchen contractors, architects, hospitality buyers, importers, and distributors comparing custom drawer depth, divider layouts, serviceable door panels, and repeatable finish control. For environmental selection, connect this case with the indoor vs outdoor stainless cabinet guide, the covered-patio case, and the poolside exposure case.
Commercial ordering answers
| Can APEX work from customer drawings? | Yes, subject to drawing and manufacturability review. |
|---|---|
| Can sizes and dividers be customized? | Yes; dimensions, front profile, internal layout, and hardware are confirmed on approved drawings. |
| Is a sample available? | A finish sample, component sample, or prototype can be discussed according to project complexity. |
| What are MOQ and lead time? | They are quoted per project after size, finish, hardware, quantity, packing, and approval scope are known. |
| How is the batch shipped? | Use the project packing specification and module codes; see the export packing case study. |
This batch was reviewed as part of a custom stainless steel cabinetry order before protective packing and dispatch. The photographed components demonstrate how APEX coordinates visible finish quality with practical storage, serviceable hardware, and repeatable fabrication. Buyers planning a similar project can compare the details with our stainless steel kitchen cabinet product and the custom stainless steel cabinet specification guide.
Project overview
| Product type | Custom stainless steel cabinet drawer and door components |
|---|---|
| Visible finish | Directional brushed stainless steel |
| Documented features | Deep drawer boxes, flush framed fronts, adjustable dividers, removable door panels and prepared hardware points |
| Production stage | Factory fit, finish and hardware inspection before packing |
| Customization | Dimensions, stainless grade, internal layout, front profile and hardware are confirmed per approved drawing |
Drawer-box fabrication and front alignment
The first inspection group focuses on the drawer body and the relationship between the internal box, front panel, side returns, and upper grip profile. The brushed grain runs in a controlled direction, while folded edges create a clean perimeter without exposed raw sheet edges. The open photographs make the usable internal depth and corner construction easy to review.



Full-extension access and usable storage
A full-extension configuration allows the user to reach the rear of a deep drawer without removing the box. During approval, drawer travel should be checked together with the expected load, slide rating, adjacent door clearances, countertop overhang, and appliance interference. The photograph below shows the entire internal base available for storage inspection.

Adjustable stainless steel divider system
The drawer organizer uses separate stainless divider elements to create long and narrow storage zones. This type of layout can be coordinated for cookware, utensils, bottles, tools, or project-specific equipment. Divider count, spacing, removability, edge treatment, and retained load should be confirmed before production.

Brushed finish and edge-quality inspection
Directional brushing makes grain consistency important across drawer fronts, door faces, frames, and adjacent panels. The factory inspection checks the visible grain direction, corner transitions, folded returns, gap consistency, handling marks, and surface protection. Physical finish samples should be approved when the cabinets must coordinate with appliances, worktops, trims, or metalwork from another supplier.

Door-panel construction and hardware preparation
The second inspection group records separate stainless steel cabinet door panels. The photographs show flat brushed faces, reinforced perimeter construction, prepared hardware points, and removable access for final assembly. Hardware locations must match the cabinet body, hinge direction, opening angle, handle or push-latch system, and installation sequence.




Pre-shipment quality-control checklist
- Confirm the component code and quantity against the approved cabinet schedule.
- Verify drawer and door dimensions, orientation, and opening direction.
- Check drawer travel, internal clearance, divider fit, and intended hardware function.
- Review brushed grain direction and color consistency across related components.
- Inspect visible faces, corners, folded edges, joints, and gap alignment.
- Confirm hinge, latch, handle, slide, and fixing locations against the drawing.
- Remove fabrication residue and protect finished surfaces from handling damage.
- Label components by cabinet, room, unit, or installation sequence when required.
- Use edge, corner, face, and moisture protection suited to the shipment route.
Information required for a similar cabinet order
Send the cabinet elevation or room plan, overall dimensions, drawer and door schedule, required stainless grade, finish sample, internal organizer layout, appliance or service points, hardware preference, quantity, delivery destination, and target date. APEX can review the information and prepare a drawing-based quotation for indoor, outdoor, hospitality, residential, or commercial cabinetry.
Frequently asked questions
What stainless steel grade was used for this cabinet batch?
The photographs confirm a brushed stainless appearance but do not independently verify the alloy grade. The required grade, such as 304 or 316 stainless steel, must be listed on the approved quotation and production drawing.
Can the drawer dividers be customized?
Yes. Divider count, spacing, height, removability, and storage zones can be reviewed against the items the drawer is expected to hold.
Can drawer and door dimensions be made to order?
Yes. Cabinet width, height, depth, front profile, drawer configuration, door orientation, and hardware positions can be customized after the room and installation constraints are confirmed.
How is the brushed finish checked before shipment?
Inspection normally reviews grain direction, visual consistency, flatness, corners, folded edges, handling marks, and compatibility between adjacent visible components.
Can these components be supplied for a complete kitchen?
Yes. Individual drawer and door details can be developed as part of a coordinated cabinet run that includes sink, appliance, storage, island, wall, and tall-cabinet modules.
What should be approved before production?
Approve the cabinet schedule, dimensions, stainless grade, finish, drawer and divider layout, door swing, hardware, appliance clearances, labeling, packing method, and delivery requirements.
Request a custom stainless steel cabinet quotation
Contact APEX with your cabinet drawings, dimensions, finish, quantity, and delivery country. We can review a custom stainless steel cabinet package and confirm the production details needed for pricing.
Verified evidence and limits of this case
- Evidence source
- Ten factory inspection photographs supplied for this shipment case.
- Directly observed
- Deep drawer boxes, flush folded edges, directional brushing, an adjustable divider system, separate door panels, prepared hardware points, and factory fit-and-finish review.
- Production stage
- Inspection before protective packing and dispatch.
- Not inferred from photographs
- Exact alloy grade, sheet thickness, load rating, final dimensions, hardware brand, and installation conditions.
- Commercial source of truth
- The approved quotation, cabinet schedule, finish sample, and production drawing control the final order specification.
This distinction keeps the published case useful for comparison without turning visual evidence into unsupported technical claims.
How this guide is verified
Product details in this guide reflect APEX configurable manufacturing options. Final stainless grade, dimensions, finish, lighting, accessories, packaging, and delivery terms are confirmed in the approved quotation and production drawing.
Reviewed by APEX Stainless Solutions · Updated October 20, 2026